Installation and maintenance of electrical equipment from qqq's blog
Whether the asphalt floor is the first installation or relocation to the new site to install, engaged in electrical installation of technical staff and maintenance personnel must first combined with the asphalt floor of the work process familiar with the entire electrical system control mode and principle, so the installation work is relatively easy. In the production of asphalt mixing plant in the main part of the vibrating screen, mixing cylinder and aggregate drying tube is the whole set of equipment to produce the most intense vibration components. When we carry out the basic construction, we should pay special attention to the main building part and the aggregate drying cylinder part of the basic casting, must ensure that the same level of the surface does not exceed the standard range of �� 2cm, to prevent the construction of cutting corners and the foundation does not meet the flatness requirements Factors to the equipment to bring hidden dangers. Wiring according to the location of the drawings and electrical components from the peripheral part of the control unit or the periphery to the control room one by one, the cable layout to select the appropriate path, and requires weak cable and strong electrical signal cable slot layout. Power supply line cross-sectional area is large, coupled with control components, control lines, generally use cable trench trench wiring, we carefully check the cable before the cable for damage, to avoid short circuit or open circuit phenomenon. At the same time the line should pay attention to concealment and protection, do a good job safety warning signs, the circuit should go away from the oil and high temperature, wet areas, reduce the corrosion and aging of the wire.
concrete floor trowel finish
asphalt driveway caulk and repair
drive fix asphalt crack filler
garden machinery maintenance bristol
Reviews and quick errands
No comments yet.
You need login to comment.